Only pins 3,4 and 6 are populated on the 8P8C end. It probably doesn't matter whether the ground pin (black) lands on pin 4 or 5 because both should be ground on the Opengear end. The yellow wire is unused.
Saturday, June 17, 2017
Serial Pinout for APC
This is just a quick note to remind me how to make serial cables for APC power strips. This cable works between an APC AP8941 and an Opengear terminal server with Cisco-friendly (-X2 in Opengear nomenclature) pinout.
Only pins 3,4 and 6 are populated on the 8P8C end. It probably doesn't matter whether the ground pin (black) lands on pin 4 or 5 because both should be ground on the Opengear end. The yellow wire is unused.
Only pins 3,4 and 6 are populated on the 8P8C end. It probably doesn't matter whether the ground pin (black) lands on pin 4 or 5 because both should be ground on the Opengear end. The yellow wire is unused.
Subscribe to:
Posts (Atom)